About Incredible Solutions 1 Gallon Table Top & Bar Top Epoxy Resin
We provide detailed Instructions For Use with every epoxy kit. River tables must be supported to prevent flexing which could cause cracking. 320 grit sandpaper is recommended to ensure the epoxy sticks to the surface of the clear coat leaves a shine/gloss. The best way to apply epoxy is to use a water-based clearcoat (must be water-based), which is then cured and applied to your project. For more information, contact us at info@rivertable.com. Our epoxy is UV resistant, which resists yellowing. It is possible to leave the epoxy outdoors if not exposed to direct UV exposure. We recommend exercising caution when considering use over white or light-colored substrates/surfaces. Heat fluctuations can cause metal and glass to expand and contract at a different rate than the cured epoxy. Our customers have used this epoxy for custom tumbler designs....but we do not recommend leaving finished projects in direct sunlight or for permanent outdoor applications. Our epoxy mixes well with mica pigment powders for colored epoxy applications. Do not mix epoxy with paint or anything oil-based; many of our customers use mica powder epoxies. A small amount and adding more until the desired color is achieved. Choose the right quantity & formula for your project. Click here to learn more about how to color your epoxy application. Back to the page, you came from - CNN report. You are here: Home / Saturday/June/2008 our epoxy cures crystal clear, multiple layers will not compromise color/transparency. If you wish to apply paper decals, bottle caps, or other objects under the Table Top surface, those objects need to be bonded to the surface with craft glue or a thin layer of tabletop epoxy. Our rule of thumb regarding coverage is 12 sqft per mixed gallon at 1/8 inch. Our product is made in the USA and is available for purchase at etsy.com. Epoxy resin leaves durable, blemish resistant, water-resistant, and impact-resistant coating. The beauty of epoxy is the ability to regain a smooth, high gloss finish after years of use. You can apply the second coat when the prior coat is tacky to the touch. If you wait longer than 12 hours between coats, you should use 320 grit scuffing the surface. It is important you keep your project in this environment throughout the entire curing process. We recommend using this product on a leveled and flat work surface so that it can flow and self-level properly.
