Home > USB-to-USB Adapters > UGREEN SATA to USB 3.0 Adapter Cable for 3.5 2.5 Inch SSD HDD SATA III Hard Drive Disk Converter Support UASP Compatible with Samsung Seagate WD Hitachi Toshiba with 12V Power Adapter

UGREEN SATA to USB 3.0 Adapter Cable for 3.5 2.5 Inch SSD HDD SATA III Hard Drive Disk Converter Support

Supports 2.5 3.5 " Sata Hdd Ssd, 3.5 2.5 " Ssd Hdd Sata Iii Hard Drive Disk Converter Support Uasp, Traditional Usb 3.0, 12V 2A Power Adapter

9.3
Created with Raphaël 2.1.29.3010
BVR Rating 731 reviews
Add to Wishlist
Available on prime

Reason to Buy

  • The adapter is suitable for booting up old spare hard disks and recovering important files of broken PC
  • Equipped with a DC-Jack port and a 12V/2A power adapter that offers enough power supply
  • The cable supports high-speed data transfer up to 5 Gbps

Minor Drawbacks

  • May randomly disconnect from the computer at times

Products Similar to UGREEN USB-to-USB Adapters

Analysis of 700+ reviews for UGREEN SATA to USB 3.0 Adapter Cable for 3.5 2.5 Inch SSD HDD SATA III Hard Drive Disk Converter Support

img-alt

BestViewsReviews analyzed 77,299 reviews for 70 products in the USB-to-USB Adapters category.

img-alt

We analyzed a total of 731 reviews for this product out of which, 0 reviews were received in the last 6 months.

img-alt

The analysis indicates that around 87% reviews were positive while around 9% of reviews had negative sentiment.

BestViewsReviews Ranking and Score for UGREEN SATA to USB 3.0 Adapter Cable for 3.5 2.5 Inch SSD HDD SATA III Hard Drive Disk Converter Support

img-alt

This product received a total score of 9.27 out of 10, based on review sentiments and user opinions related to 8 features:

  • Compatibility
  • Customer support
  • Length
  • Longevity
  • Overall satisfaction
  • Quality of material
  • Transfer speed
  • Value for money
  • What users have to say about UGREEN SATA to USB 3.0 Adapter Cable for 3.5 2.5 Inch SSD HDD SATA III Hard Drive Disk Converter Support


    I needed to access my data file immediately and this handleusb to SATA interface gave me the ability to do that.


    I used it on both the 3.5 inch drive and the 2.5 inch drive, and it had a blue power light that illuminates when you have a drive plugged in.


    If you are running a RetroPie setup, you will need to use the Power Adapter if you want to power the system, but if you are using a single board computer that uses Microusb, it will work just fine.


    It's much more affordable than connecting an old internal hard drive that has been removed from a computer to a computer without the computer having to be re-booted.


    It has been fully compatible with both Windows PC and Linux, without additional drivers needed, for connecting my external 2.5" SATA HDD and SSD's.

    FAQ

    Q:

    Is the adapter compatible with 220/230v or only 110v?

    A:

    Thank you so much for your inquiry, I'll get back to you soon.

    Q:

    Will this device recognize the drive's sCrypt as it is sCrypt with wave and winmagic?

    A:

    You will not be able to circumvent the drive encryption, even though it will be recognized.

    Q:

    Will it work with a 5volt toshiba HDD?

    A:

    If your hard drive is a type of SATA, this sata to usb 3.0 adapter can work for it.

    Q:

    I cannot connect this to a 3.5” HDD because it doesn't spin. Do I use the top row of pins or the bottom?

    A:

    I'm not sure what you mean about the top or bottom row of pins. My drive has two sets of pins in a row, one set has 7 and the other 15 if I counted correctly.

    Q:

    Is it possible to connect it to a removed hard drive from an acer computer?

    A:

    If your laptop has a special connector for the drive, you just need to remove it from it before attaching it to the adapter.

    Was this page helpful to you?