LANCHEZ 1.6HP Shallow Well Pump with Pressure Tank
What we analysed
BVR’s AI bot is continuously reading, learning and evolving to generate reviews.
6,854 reviews
covering
32 products
for the category
Well Pumps
Experiential insights by users
About LANCHEZ 1.6HP Shallow Well Pump with Pressure Tank
Overall Feedback:
73% positive
72% found the motor to be reliable and durable, while 28% experienced frequent breakdowns
I found the pump impressive.
The pump works well, but its float arm is long and it won't turn on until it's all the way up over the top.
I received the first pump and installed it a few days later. However, after 2 days the seals blew out and it quit pumping.
The well-pump worked for about an hour and then stopped functioning.
72% found it easy to install
It was easy to pump out the cistern in the basement.
74% praised for its high flow rate
I observed that the pump lowered the water level by 60 inches in 35 minutes, which is equivalent to a flow rate of approximately 1 gallon per second.
The pump lowered the water level by 60 inches in 35 minutes, equivalent to a flow rate of approximately 1 gallon per second.
67% liked the high-quality components, but 33% found them subpar
I used a pump with a pool vacuum hose attached and was able to lower the water level 60 inches in 35 minutes, which equates to approximately 1 gallon per second.
From start to finish, the pump met all my expectations.
I was disappointed that the pump couldn't get the last 1.5 inches of water, but it efficiently lifted the first 300 cubic feet of water (along with some silt and small pebbles) out of a 10-foot deep excavation.
After just 2 days of installation, the seals blew out and the pump stopped working.
83% liked the quiet operation
Openai_error
The well-pump lifted the first 300 cubic feet of water up and out of a 10-foot deep excavation very quietly.
80% appreciated its high pressure rating
I was able to lower the water level 60 inches in 35 minutes with the pump, which is roughly 1 gallon per second.
