William Craft Unfinished Natural with Tree Bark Wood Slices 10 Pcs
What we analysed
BVR’s AI bot is continuously reading, learning and evolving to generate reviews.
6,541 reviews
covering
47 products
for the category
Unfinished Wood
Experiential insights by users
About William Craft Unfinished Natural with Tree Bark Wood Slices 10 Pcs
Overall Feedback:
76% positive
72% found the dimensions accurate, while 28% faced problems
Both sides of the wood are smooth but have blade marks.
I was impressed with the size consistency of the wood rounds, but they are not perfect.
66% appreciated the grain pattern, but 34% found it uninteresting
I noticed that one of the wood slices had a divot/valley cut into it running across the grain, although the other side was fine.
One of the wood slices has a divot/valley cut into it running across the grain, although the other side is fine.
If you don't apply glue or epoxy in the gaps, the bark flakes off easily and loses its rustic look.
Four out of ten pieces have large splits and are not usable due to uneven and inconsistent grain pattern of the unfinished wood.
67% appreciated the moisture content, yet 33% experienced issues
Even after getting wet from plant watering and the humidifier running on them daily, the wood slices are not moldy.
I received 7 out of 9 wood slices with mold on one or both sides, indicating high moisture content.
The wood is too soft and difficult to burn fluid or clean lines. It seems to be treated with some sort of plastic or goopy substance.
65% praised the sanding quality
Fairly smooth wood cuts required minimal sanding to create artistic coasters.
The wood surfaces are soft and smooth on both sides of each piece, so there is no need to sand down any rough spots.
If you want the wood to be pristine, you need to sand it.
The wood slices are of excellent quality and evenly cut without any mar or blemish.
68% praised the wood quality, while 32% found it lacking
I compared the wood quality of this seller with another seller and found this seller to be of better quality.
The wood discs are close to a perfect circle with no major impurities and the bark is not actively crumbling off.
The wood surfaces are soft and smooth on both sides of each piece, indicating good quality and no need for extra sanding.
The wood appears to be treated with some sort of plastic or goopy substance and is too soft to burn fluid or clean lines.
