AWIZOM 12 Pack Basswood Sheets for Crafts-12 x 12 x 1/8 Inch- 3mm Thick Plywood Sheets
What we analysed
BVR’s AI bot is continuously reading, learning and evolving to generate reviews.
6,541 reviews
covering
47 products
for the category
Unfinished Wood
Experiential insights by users
About AWIZOM 12 Pack Basswood Sheets for Crafts-12 x 12 x 1/8 Inch- 3mm Thick Plywood Sheets
Overall Feedback:
75% positive
67% found the dimensions accurate, while 33% faced problems
I have noticed that the plies of the plywood are bowed, making it difficult to achieve a consistent cut depth across the material.
The plywood's bowed plies make it hard to achieve a consistent cut depth.
Most of the pieces are warped and of poor quality, making it difficult to cut them through even after multiple passes with the laser.
My second order was not consistent with the product specification of 3mm as its thickness was only 2.4mm.
65% appreciated the grain pattern, but 35% found it uninteresting
I designed some files based on an initial order thickness of 2.9mm, but the second order came in at a thickness of 2.4mm, which is not consistent.
65% appreciated the moisture content, yet 35% experienced issues
My second order was 2.4mm thick, which differs from the initial order thickness of 2.9mm.
I am concerned about the potential fire hazard posed by the fuzzy material. The increased surface area and presence of loose fibers make it more susceptible to catching fire, requiring constant monitoring and adjustments to the laser power settings and speed to mitigate this risk.
66% praised the sanding quality, though 34% found it rough
I find it challenging to achieve a consistent cut depth across the material due to the bowed plies.
Nineteen sheets were poorly sanded, gouged, and had warped. The fibers were peeled up due to transfer tape.
On most of the sheets, the grain of the wood does not go the length of the sheet.
Most of the pieces are warped and of poor quality, making it difficult to cut them even after multiple passes with the laser.
70% praised the wood quality, while 30% found it lacking
One of the pieces was decently warped, but I used magnets to hold it flat and it was still usable.
The wood is beautiful.
On most of my sheets, the grain of the wood does not go the length of the sheet and only 4 out of the 12 sheets are not warped.
