MAS Table Top Pro (1-Gallon Kit) | Crystal Clear Casting for DIY Arts and Crafts Projects
What we analysed
BVR’s AI bot is continuously reading, learning and evolving to generate reviews.
25,022 reviews
covering
55 products
for the category
Tile Epoxy Adhesives
Experiential insights by users
About MAS Table Top Pro (1-Gallon Kit) | Crystal Clear Casting for DIY Arts and Crafts Projects
Overall Feedback:
76% positive
69% appreciated the fast drying time, but 31% desired more
I noticed that the working time is almost non-existent, which means it dries too fast.
OR
The working time is almost non-existent, which means it dries too fast.
75% found it easy to use, but 25% struggled
I was able to use the epoxy for the first time easily and mixed it thoroughly. To avoid over dyeing, I added the dye to the cup first.
The only drawback of the product is the low VOC, which is not zero, resulting in a 4-star rating for ease of use.
I had to apply 4 coats to get a decent surface on the desk, indicating that the product was difficult to work with.
71% liked the flexibility, but 29% experienced cracking
I had to make braces to screw the table and wait for 2 weeks before removing them to avoid the cupping problem caused by the epoxy.
I found this epoxy difficult to work with as it was thicker and had a short working time. I had to panic and move it around the countertop as it was not leveling out.
During the pouring process, the resin cracked and curled due to the generated heat.
70% praised the moisture resistance, while 30% faced issues
The desirable temperature for this epoxy is between 70 and 79 degrees, which could be a factor in the issue I am experiencing.
