Vibra-TITE 19960 Hot-Lock Extreme High Temperature Threadlocker
What we analysed
BVR’s AI bot is continuously reading, learning and evolving to generate reviews.
8,982 reviews
covering
20 products
for the category
Thread Lock Sealers
Experiential insights by users
About Vibra-TITE 19960 Hot-Lock Extreme High Temperature Threadlocker
Overall Feedback:
80% positive
75% praised for its strong adhesive properties
I have found that the adhesive strength of this thread-lock-sealer is stronger than blue loctite. When I tried to remove the set screws, it was starting to bend the allen wrench. I then put the barrel into a pot of boiling water on the stove, with the water covering the screws to be removed. After about 5 minutes in the hot water, the screws came loose easily.
I used the product to ensure that the QD muzzle break is firmly attached to the barrel. It works fine.
64% liked the fast curing time
The key to curing the product properly is to use a heat gun. I used a Wagner heat gun on the low setting and it took less than 10 minutes to cure.
74% found it easy to apply
I found the thread-lock-sealer easy to use, but it's important to heat it up to the correct temperature for curing.
