3M Clear Extra-Wide Headlight Protective Scratch-Proof Wet-Apply Tint Vinyl Wrap Film
What we analysed
BVR’s AI bot is continuously reading, learning and evolving to generate reviews.
5,083 reviews
covering
39 products
for the category
Protective Shields
Experiential insights by users
About 3M Clear Extra-Wide Headlight Protective Scratch-Proof Wet-Apply Tint Vinyl Wrap Film
Overall Feedback:
74% positive
65% praised the bubble-free application, but 35% experienced issues
The line in the picture is barely visible, indicating good quality and being bubble-free.
I have noticed that the vinyl protective shield marks the vinyl slightly while releasing air/water bubbles, which is a downside.
I was unable to remove the bubbles or creases that appeared after applying the protective film, indicating that it may not be bubble-free as advertised.
66% were impressed with the clarity, while 34% weren't
I just installed new headlight lenses that are clear and look like there is nothing there.
Once properly installed, it is not visible unless I really look.
The film has decent thickness and is clear.
After adhesion, the headlights lost their sharpness and the beam of light felt like it was going through a fine mesh.
Show more
72% praised the device compatibility, but 28% faced issues
I found that the material did not conform to the shape of my vehicle's headlights, indicating a problem with device compatibility.
72% appreciated the durability, though 28% experienced peeling
I have no doubt that the reasonably thick and pliable vinyl can protect against regular rocks.
After adhesion, I have noticed that the beam of light loses its sharpness, which is the worst of all. Additionally, the light feels like it is going through a fine mesh, especially noticeable when it hits on a wall or fence.
If we reposition the film on contours, the glue will separate from the film and leave noticeable visual defects.
64% found it easy to install, but 36% faced troubles
I did a wet install and it went on fine as long as I kept it wet during the process. It is sticky if not wet.
If the surface is flat or has a gentle curve, it would be relatively easy for me to install.
I suggest watching an installation video. The squeegee that comes with the product is not great for applying film to headlights. It's better to order a rubber one, which I found helpful.
Installing the film on my wife's Pilot was slightly challenging due to the curved headlights.
67% praised the protection
I installed vinyl only on the headlights of my Honda and noticed that the unprotected lens is yellowing and becoming opaque while the protected headlight remains transparent.
I wanted to apply protective film to my new headlights to make them last longer.
73% liked the preserved touch sensitivity, while 27% experienced lag
I installed vinyl on the headlight of my Honda and noticed that the unprotected lens is yellowing and becoming opaque, while the protected headlight remains transparent.
I cleaned the taillights before applying the protective shield, indicating that it is not touch sensitive.
