EasyIDea Premium ID Card and Badge Laminator
What we analysed
BVR’s AI bot is continuously reading, learning and evolving to generate reviews.
21,640 reviews
covering
18 products
for the category
Office Presentation Laminators
Experiential insights by users
About EasyIDea Premium ID Card and Badge Laminator
Overall Feedback:
67% positive
68% found it easy to operate, while 32% had trouble loading the film
I learned about the switch having two settings - one for thin and the other for thick, after reading the instructions.
I used the laminator once and it worked, but the next day it took 20 minutes to heat up.
68% praised the crystal-clear lamination, but 32% experienced bubbles
It works perfectly with 5mil laminate pouches and is okay with 10mil. The pouch closest to the business card requires several passes to seal, and I'm not sure if the business cards are too thick.
I am dissatisfied with the quality of the laminator. It feels cheaply built and has poor internal components.
Despite the good size and price of the laminator, the laminating quality is poor.
I got the card stuck inside the laminator and there is no way to get it out.
70% praised the easy maintenance, while 30% experienced frequent jamming issues
For my limited use of 10-15 name badges per month, I need to send my pouches through 3-4 times to get a good seal, but it is working fine.
I had to pry out one ID that got stuck in the machine, indicating that the laminator is difficult to maintain and use.
The laminator failed in 91 days.
I noticed that the product was sticking and burning out the information that was laminated, and I think we should have returned it immediately.
The product was sticking and burning out the laminated information. We should have returned it immediately.
Show more
79% appreciated the quiet operation, although 21% found it noisy
I had to pry out one ID that got stuck in the machine.
I got the card stuck inside the laminator on the third card and there is no way to get it out.
I put the first ID card into the laminator and it melted.
65% praised the smooth paper feeding, while 35% experienced paper jams
I faced an issue with the laminator where the pouches did not seal. However, after reading the instructions, I learned that the switch has two settings - one for thin and the other for thick. Once set on thick, it worked.
Despite its good size and price, I found the laminator's performance to be poor.
After switching on the machine, it took 20 minutes to heat up, indicating poor performance in paper handling.
68% appreciated the fast lamination speed, although 32% experienced jamming issues
For the first 100 or so cards, I had trouble-free experience with the laminator. But for the rest of the cards, I had to make a minimum of two passes through the laminator to successfully bond the three layers.
On the third card, it got stuck inside and there is no way to get it out.
