LLTOP LED Driver 60 Watts Waterproof IP67 Power Supply
What we analysed
BVR’s AI bot is continuously reading, learning and evolving to generate reviews.
7,771 reviews
covering
43 products
for the category
Lighting Low Voltage Transformers
Experiential insights by users
About LLTOP LED Driver 60 Watts Waterproof IP67 Power Supply
Overall Feedback:
90% positive
84% liked the compatibility with various lighting systems, but 16% experienced some limitations
I paired the product with a Meross outdoor smart plug to deliver up to 150 watts to the Malibu LED lights lining my driveway between each sunset and 9 pm. It will work just as well with Amazons Alexa.
I faced an issue with the power supply causing interference with my powerline ethernet adapters.
I tried to use the power supply with a 12 volt light and a 5 volt light, but it did not work. My neighbor checked both power supplies and found that they were only putting out 3 volts. This is a 12 volt power supply, so it should put out 12 volts for low voltage LED lighting, but it does not.
When no load was connected, I measured the transformer delivering 11.5v, but it stopped delivering when the load was attached.
Show more
81% appreciated its performance in harsh environments, but 19% experienced some limitations
My accessories got fried when the outer casing of the power supply became hot. This shows that the power supply is not durable enough for harsh environments.
The power supply is not durable enough for low voltage LED lighting environments. It is only putting out 3 volts instead of the supposed 12 volts.
After just one day, the item stopped working, suggesting it lacks durability.
I faced an issue with the power supply causing interference with the powerline ethernet adapters while it was plugged in.
Show more
84% liked the easy installation process, while 16% found it complex
I ordered a different transformer which seems to be working great.
I split the lights into 13 each on the two transformers.
After installing the product, I turned on the lights and nothing happened.
The power supply fried many of our accessories and it took days of work to rewire everything with a different adapter.
Show more
71% praised for its quiet operation, but 29% noticed a slight humming noise
I noticed that the shredder was not able to light up a 12 volt led light.
The shredder cannot light up a 12 volt led light.
When I connected 13 lights, they started flashing.
The outer casing of the supply became hot.
76% praised for its energy-efficient design, while 24% noticed a slight energy loss
Only 100W powers 60W of load, indicating that the transformer is not efficient in terms of power consumption.
After only about 20 minutes of 'on time' or about 2 uses, the outer casing of the supply became hot.
I experienced interference with my powerline ethernet adapters while using the power supply, which may be related to the device's power efficiency.
I have noticed that the power supply is not efficient enough for low voltage LED lighting.
83% found it to be highly reliable, but 17% experienced occasional issues
I highly recommend the product.
After a day, the transformer stopped working and delivered 11.5v without load, but stopped when the load was attached.
I experienced interference with my powerline ethernet adapters while using the power supply, which could be related to the product's reliability.
I have tested the power supply with a volt meter and found that it is not putting out the correct voltage. This has negatively impacted my experience with the product's reliability.
Show more
74% appreciated the built-in safety features, although 26% found some limitations
When I plugged in the power supply, it caused interference with my powerline ethernet adapters.
The power supply is not providing the required 12 volts for low voltage LED lighting, which is a safety concern as it may not be suitable for all types of lighting.
One transformer worked fine while the other could only power 12 of the 13 LED lights.
I experienced a serious issue with the power supply where the outer casing became hot and 120v was present on the outside casing. This caused many of the accessories attached to it to be fried and required days of work to rewire everything with a different adapter. I strongly advise against buying this power supply due to the safety concerns.
70% appreciated its stable voltage output, although 30% noticed occasional fluctuations
I have complained that the power supply is not providing the correct voltage for low voltage LED lighting. It should be 12 volts, but it is only outputting 3 volts.
One transformer worked perfectly while the other could only power 12 out of 13 LED lights.
I faced an issue with the power supply causing interference with my powerline ethernet adapters while it was plugged in.
I noticed that the product takes 3 seconds to turn on and when I touched it after being on for 20 minutes, I almost got burned. This indicates that there is an issue with voltage regulation of the product.
Rephrased:
The product takes 3 seconds to turn on and when it's been on for 20 minutes, it can cause burns due to voltage regulation issues.
