Home > Lighting Low Voltage Transformers > inShareplus 12V Power Supply, 12 Voltage 2A 24W Switching Power Supply, Drive, Power Adapter, AC 110V to 12 Volt Power Supply for LED Strip Light with 5.5/2.1mm DC Female Barrel Connector ; Brand: inShareplus
BVR’s AI bot is continuously reading, learning and evolving to generate reviews.
How it works?
BVR’s AI bot is a smart self learning AI bot algorithm that ingests large amount of data to filter our product reviews that are most important for you to make a purchase
7,771 reviews
covering
50+ products
for the category
Lighting Low Voltage Transformers
Experiential insights by users
About inShareplus 12V Power Supply, 12 Voltage 2A 24W Switching Power Supply
Overall Feedback:
79% positive
79% liked the compatibility with various lighting systems, but 21% experienced some limitations
The power adapter was too hot to touch and the LEDs started blinking within 15 minutes. This suggests that the power adapter is not compatible with the LED light strip.
The lights are flickering, indicating a problem with the compatibility of the lighting-low-voltage-transformers.
I tested the transformer with a variable load and am confident it can handle 1 Amp, maybe 1.5 Amps, but not 2 Amps.
The power adapter for LED light strips is cheaply made and not properly rated, causing it to overheat.
81% appreciated its performance in harsh environments, but 19% experienced some limitations
I used the product for 2 months and it died with the same issue. The seller offered to replace it and I am happy with their response.
Within 15 minutes, I noticed that the power adapter became very hot and the LEDs started blinking on and off. This indicates that the product cannot handle harsh environments.
I have noticed that the adapter cannot handle power flow for more than an hour, causing the lights to blink.
On the third plug-in, it made a popping noise and smelled of burnt electronics, but it worked fine for a few times before that.
87% liked the easy installation process, while 13% found it complex
I used the product for 2 months.
Within 15 minutes of usage, the power adapter became very hot and the LEDs began to blink on and off.
78% praised for its quiet operation, but 22% noticed a slight humming noise
I noticed that the transformer made a popping noise and smelled of burnt electronics.
The transformer smelled of burnt electronics and made a popping noise.
The lights are flickering.
Within 15 minutes of using the power adapter, the LEDs began to blink on and off.
When I use the lights for more than an hour, they start blinking, indicating that the adapter is not performing properly.
83% praised for its energy-efficient design, while 17% noticed a slight energy loss
After an hour of use, the lights start blinking, indicating that the adapter cannot handle their power requirements.
I noticed that the power adapter was extremely hot, almost too hot to touch, which suggests that it is not power efficient.
The power adapter is not power efficient as it gets extremely hot to touch.
The lights are flickering, indicating a problem with the power efficiency of the lighting-low-voltage-transformers.
After 45 days of use, the product overheated and stopped working.
79% found it to be highly reliable, but 21% experienced occasional issues
The product worked for 2 months, died with the same issue, and was replaced by the seller. However, it has died again and the lights are flickering.
I complained that the power adapter was dangerously hot and could have caused a fire if left unattended.
When I connected the transformer to a 1.7 amp LED load, it started flashing on and off after only 30 seconds.
The power adapter advertised for LED light strips is not reliable and can overheat due to cheap components and improper power rating.
After 45 days of use, the transformer overheated and stopped working, which was after the return window closed.
I would not recommend using this transformer for a permanent installation or any use beyond a few minutes of testing.
87% appreciated the built-in safety features, although 13% found some limitations
The power adapter was extremely hot, all the way down to the female connector, and almost too hot to touch. If left unattended, it may have caused a fire.
The lights are flickering, indicating a safety issue with the low-voltage transformer.
The adapter is getting hot and overheating because it is not properly rated for the power flow.
68% appreciated its stable voltage output, although 32% noticed occasional fluctuations
When I connected the supply to a 1.7 amp LED load, it started to flash on and off after 30 seconds.
The lights are flickering, indicating an issue with the voltage regulation of the lighting-low-voltage-transformer.
After 45 days of usage, the product overheated and stopped working, indicating improper voltage regulation.
Within 15 minutes of use, the power adapter became very hot and the LEDs began to blink on and off, suggesting inconsistent or non-existent voltage regulation.
79% liked the compatibility with various lighting systems
81% appreciated its performance in harsh environments
87% liked the easy installation process
Experiential insights by users
The power adapter was too hot to touch and the LEDs started blinking within 15 minutes. This suggests that the power adapter is not compatible with the LED light strip.
92% appreciated its performance in harsh environments
92% appreciated its stable voltage output
Experiential insights by users
I have noticed that this power supply is durable in harsh environments and advertised as waterproof, giving it an advantage over other similar DC supplies.
The product is easy to hook up with the included 3 prong plug and seems well made.
Need help? Don't see what you are looking for?
Let us know and our team will start working on your favorite product or category as soon as possible. Meanwhile let us help you search for them on Amazon.
Thanks for your feedback!
Cookies are used on this website to ensure you have the best experience possible.