UVPoxy Table Top Coating & Art Epoxy Resin Kit
What we analysed
BVR’s AI bot is continuously reading, learning and evolving to generate reviews.
7,704 reviews
covering
50+ products
for the category
Industrial Coatings
Experiential insights by users
About UVPoxy Table Top Coating & Art Epoxy Resin Kit
Overall Feedback:
72% positive
69% praised for its exceptional adhesion strength, while 31% experienced peeling issues
I was initially nervous about the thickness of the resin without the hardener, but ended up loving the results. This indicates that the adhesion strength of the resin is good.
I was nervous about the resin being too thick without the hardener, but the final result turned out great. This shows my positive sentiment towards the adhesion strength of the industrial coating.
The coating can be worked with for many hours after mixing, but it requires a temperature of 70+ degrees. It's important to ensure that the project does not leak.
The coating felt slightly sticky when touched, indicating poor adhesion strength.
77% liked its outstanding chemical resistance, though 23% experienced degradation
The resin has good chemical resistance and resists yellowing over time.
I have found that the resin has good chemical resistance and resists yellowing over time, unlike most other resins on the market.
The coasters are resistant to chemical effects. I have put dishes from the microwave on top of them several times with no ill effect.
The coating can withstand temperatures of 70+ degrees and can be worked with for many hours after mixing. It is important to ensure that the project does not leak.
Show more
79% found it to have excellent heat resistance
The coating can be worked with for many hours after mixing and can withstand temperatures above 70 degrees.
After mixing, I can work with the product for many hours and it can withstand heat of 70+ degrees.
78% appreciated its compatibility with various substrates, but 22% experienced adhesion issues
I was initially nervous because the resin without the hardener seemed thick, but I ended up loving the results. This indicates the resin's compatibility with various substrates and materials.
I was initially nervous because the resin without the hardener seemed thick, but I ended up loving the results. This indicates that the resin is compatible with various substrates and can produce good results even when used with thick substrates.
After following the instructions and mixing it for 3 minutes, I found that the resin did not turn out as expected and cannot be used due to its incorrect texture.
75% praised for its excellent abrasion resistance, though 25% noticed scratches
The resin did not turn out as expected even after following the instructions. It cannot be used, indicating poor abrasion resistance of the industrial-coatings.
76% appreciated its excellent corrosion protection, but 24% noticed rust formation
My work was damaged due to the poor performance of the product, so I had to buy another brand to fix it.
72% liked its fast curing time, but 28% experienced slow drying
The coating can be worked with for many hours after mixing, as long as the temperature is above 70 degrees and the project does not leak.
I was initially nervous because the resin without the hardener seemed too thick, but I ended up loving the results.
The resin did not cure as expected even after 48 hours and the texture is not what it should be.
78% praised for its high-gloss finish, though 22% experienced unevenness
After 3 days of setting, I am ready for finish sanding.
The resin adds a thick layer to my work and is crystal clear.
Even after following the instructions and mixing it for 3 minutes, I found the resin to have an unexpected texture and it was unusable.
