Original Fire Retardant 32.0 Fl Oz( 946ml)
What we analysed
BVR’s AI bot is continuously reading, learning and evolving to generate reviews.
7,704 reviews
covering
50+ products
for the category
Industrial Coatings
Experiential insights by users
About Original Fire Retardant 32.0 Fl Oz( 946ml)
Overall Feedback:
75% positive
66% appreciated its excellent corrosion protection
The materials treated with our product will not burn on their own.
The product prevents materials from burning on their own and provides corrosion protection.
74% praised for its exceptional adhesion strength, while 26% experienced peeling issues
I am not sure if the crusty white residue left by the coating will come off, indicating poor adhesion strength.
77% liked its outstanding chemical resistance, though 23% experienced degradation
If I intend to paint over it, I should be prepared for a lot of painting, but the coating will prevent ignition.
I applied the coating on art fair carts for an art show and stored them back when the show was cancelled due to the corona virus. Unfortunately, the coating dried to a crusty hard white residue that is difficult to remove.
85% liked its fast curing time, but 15% experienced slow drying
I tested the product on a smaller piece of red paper before using it on a door, but it did not work as expected.
73% praised for its high-gloss finish, though 27% experienced unevenness
I was disappointed with the finish quality of the industrial coating. I thought it would soak in completely and be invisible, but it left a strange crystalline coating on the surface.
I am not sure if the crusty white residue left by the coating will come off.
I faced a problem with the spray nozzle, which did not work properly. I had to throw it away and use the sprayer from another bottle.
92% found it to have excellent heat resistance, while 8% experienced thermal degradation
The coating will deter ignition, but if I intend to paint over it, I should be prepared for multiple coats of paint.
83% appreciated its compatibility with various substrates, but 17% experienced adhesion issues
I warn against using the coating on finished wood.
