MG Chemicals 419D-55ML 419D Premium Acrylic Conformal Coating
What we analysed
BVR’s AI bot is continuously reading, learning and evolving to generate reviews.
7,704 reviews
covering
48 products
for the category
Industrial Coatings
Experiential insights by users
About MG Chemicals 419D-55ML 419D Premium Acrylic Conformal Coating
Overall Feedback:
97% positive
95% liked its outstanding chemical resistance
The coating provides a crystal-clear, bubble-free finish and does not corrode or damage the boards.
The coating gave our boards a crystal-clear, bubble-free finish and did not corrode or damage them.
97% appreciated its excellent corrosion protection
I have noticed that the coating provides good corrosion protection as it did not corrode or damage the boards.
The coating doesn't corrode or damage Raspberry Pi Zero computers, which is a positive aspect of the product.
I suggest using a silicone modified coating or liquid electrical tape to protect the product from damage during manipulation.
96% liked its fast curing time
This coating solidifies in about 15 minutes, whereas the other brand I used took 24 hours to be touchable.
I compared the curing time of two different brands of industrial coatings. The one I am using now cures in about 15 minutes, whereas the other brand I used took 24 hours to be touchable.
Once the coating sets, it has little or no odor, but may off-gas slightly when heated.
94% praised for its excellent abrasion resistance
The coating works as intended, but there is no specific information related to abrasion resistance of industrial-coatings.
97% praised for its exceptional adhesion strength
The coating dries quickly with a crystal-clear, bubble-free finish and does not corrode or damage the boards.
89% praised for its high-gloss finish, though 11% experienced unevenness
The bottle and two included brushes look more professional than a bottle of clear coat from Sephora would.
The acrylic coating can be easily scratched off and is not a permanent solution.
89% found it to have excellent heat resistance, while 11% experienced thermal degradation
I compared the heat resistance of two different brands of industrial coatings. The coating I am using now solidifies in about 15 minutes, whereas the other brand I used took 24 hours to be touchable.
I felt a bit lightheaded after working with the coating for about 15 minutes due to the aggressive fumes emitted during the setting process.
95% appreciated its compatibility with various substrates, but 5% experienced adhesion issues
The acrylic coating can be easily scratched off and does not bond to the surface.
