MAS Table Top Pro (2-Gallon Kit)
What we analysed
BVR’s AI bot is continuously reading, learning and evolving to generate reviews.
7,704 reviews
covering
48 products
for the category
Industrial Coatings
Experiential insights by users
About MAS Table Top Pro (2-Gallon Kit)
Overall Feedback:
76% positive
74% praised for its exceptional adhesion strength, while 26% experienced peeling issues
The finish is very hard, indicating good adhesion strength of the industrial coating.
I assume that the epoxy shrinks, causing the table to cup or pull up and resulting in an uneven surface.
The epoxy bubbles up immediately and cannot be removed with a heat gun or torch, indicating poor adhesion strength of the industrial coating.
I have noticed that the finish scratches easily and has indentions from the coffee cup, indicating poor adhesion strength of the industrial-coating.
71% appreciated its compatibility with various substrates, but 29% experienced adhesion issues
I have used MAS Epoxy for various projects such as coasters, ornaments, keychains, fluid art and table tops.
The epoxy was difficult to work with due to its thickness and short working time.
67% liked its outstanding chemical resistance, though 33% experienced degradation
The smell of the industrial-coating is quite intense. It is important to plan ventilation and warn my spouse ahead of time.
67% liked its fast curing time, but 33% experienced slow drying
I noticed that the resin started to harden and get hot within 15 minutes, which indicates that the curing time of the resin is very less.
The resin's curing time is very less as it started to harden and get hot within 15 minutes.
70% praised for its high-gloss finish, though 30% experienced unevenness
I am disappointed with the finish quality of the product, specifically the microbubbles that appeared below the surface despite following the recommended preparation, mixing, and timing.
I have faced issues with the finish quality of the product as it has scratches and indentions from my coffee cup.
73% found it to have excellent heat resistance, while 27% experienced thermal degradation
I will use a different product that has higher heat resistance and is safe for now.
When I kept the heat gun on the coating sporadically, it started burning.
Due to excessive heat, the resin cracked and curled.
