Fiberglass Warehouse Polyester Laminating Resin Kit
What we analysed
BVR’s AI bot is continuously reading, learning and evolving to generate reviews.
7,704 reviews
covering
50+ products
for the category
Industrial Coatings
Experiential insights by users
About Fiberglass Warehouse Polyester Laminating Resin Kit
Overall Feedback:
94% positive
88% appreciated its compatibility with various substrates, but 12% experienced adhesion issues
When wet, the product smells but it is odorless when dry. Using the correct ratio should prevent problems mentioned in other reviews.
I am working on a boat rebuild and need to build up layers without having to sand between layers. I have used laminating resin in the past and it always stayed tacky till I top coated it with something containing wax. However, this time it hardened quickly without staying tacky.
I have a full boat rebuild going and need to build up layers without sanding between them, so I am using laminating resin.
93% praised for its excellent abrasion resistance, though 7% noticed scratches
When wet, the product has a strong smell, but it becomes odorless when dry. Using the correct ratio should prevent problems mentioned in other reviews.
I am doing a full boat rebuild and need to build up layers without sanding between them. I have used laminating resin and faced this problem personally.
93% praised for its exceptional adhesion strength, while 7% experienced peeling issues
I bought laminating resin for my boat rebuild project, but when I came back to do another layer after 2 hours, it was hard as a rock like regular resin with wax. I also tested a small amount and it did the same thing, it wasnt tacky at all.
87% liked its outstanding chemical resistance
When wet, the product has a strong smell, but it is odorless when dry. Using the correct ratio should prevent problems mentioned in other reviews.
91% appreciated its excellent corrosion protection, but 9% noticed rust formation
I am unhappy that I have to sand it all down again.
94% praised for its high-gloss finish, though 6% experienced unevenness
I purchased a laminating resin which was not tacky even after testing a small amount, indicating that the finish quality of the industrial-coatings is not up to the mark.
86% found it to have excellent heat resistance, while 14% experienced thermal degradation
I tested a small amount of the laminating resin and found that it did not stay tacky, indicating it may not have the claimed heat resistance.
