Clear Pour 32oz Epoxy Resin Kit - Premium Crystal Clear Epoxy Resin Kit
What we analysed
BVR’s AI bot is continuously reading, learning and evolving to generate reviews.
7,704 reviews
covering
48 products
for the category
Industrial Coatings
Experiential insights by users
About Clear Pour 32oz Epoxy Resin Kit - Premium Crystal Clear Epoxy Resin Kit
Overall Feedback:
80% positive
67% liked its fast curing time, but 33% experienced slow drying
I found out that the product needs to be mixed for several minutes to fully incorporate and after adding that step it cured.
I have noticed that this batch of resin cures very quickly and has bubbles everywhere, unlike other batches of resin I have used earlier.
This batch of resin cures quickly and has bubbles unlike previous batches I've used.
I have noticed that none of the things I did are curing, indicating that the curing time of the industrial-coatings is not as expected.
The curing time of the industrial-coatings is not as expected as none of my attempts to cure them have been successful.
Through my research, I discovered that the product needs to be mixed for several minutes to fully incorporate.
71% praised for its excellent abrasion resistance, though 29% noticed scratches
I noticed that the resin repelled from every piece of art, indicating that the abrasion resistance of the industrial-coatings is poor.
The abrasion resistance of the industrial-coatings is poor as the resin repelled from every piece of art.
65% liked its outstanding chemical resistance, though 35% experienced degradation
After doing some research, I found out that the product needs to be mixed for several minutes to fully incorporate.
I noticed that the epoxy separates like oil in water when applied thinly.
69% appreciated its excellent corrosion protection, but 31% noticed rust formation
None of the things I have done are curing.
73% praised for its high-gloss finish, though 27% experienced unevenness
None of the things I did are curing, indicating that the finish quality of the industrial-coatings is not up to the mark.
66% found it to have excellent heat resistance, while 34% experienced thermal degradation
I have noticed that the resin is steaming and getting very hot to touch, indicating a problem with the heat resistance of the industrial-coatings.
67% appreciated its compatibility with various substrates, but 33% experienced adhesion issues
I have noticed that the resin pieces are not curing, which suggests that the industrial coating is incompatible with the substrate.
I noticed that the resin did not adhere to the artwork, and every piece of art repelled the resin.
The resin did not adhere to the artwork and every piece repelled it.
