Boao 3 Sets Guitar Fret Protector Fingerboard Guards Stainless Steel Fretboard Protector
What we analysed
BVR’s AI bot is continuously reading, learning and evolving to generate reviews.
8,214 reviews
covering
50+ products
for the category
Guitar Tools
Experiential insights by users
About Boao 3 Sets Guitar Fret Protector Fingerboard Guards Stainless Steel Fretboard Protector
Overall Feedback:
83% positive
94% appreciated the precise bridge and nut adjustments, while 6% found it tricky to use
I suggest using a grinder to remove the sharp edge of the tool facing down towards the fretboard, as it could cause damage if not taken care of.
81% appreciated its rugged construction, but 19% experienced breakage
These guitar tools are very well-made and durable.
I noticed that the tool has a substantial burr on the back edges, which can scratch up the fingerboard if not addressed.
The guitar tool I have is made of stamped metal with a sharp edge facing down towards the fretboard.
If we don't tape off the fingerboard, these guards will damage it as the edges are too sharp.
Show more
80% praised for its help in diagnosing electronic issues, while 20% found it unclear
The guitar tools have a burr on the back edges that can scratch up the fingerboard if not addressed. A quick sand on the bottom faces is a must before using them.
If you don't have a dremel, it's advised not to buy these as grinding the sharp edge before use is necessary.
If I don't tape off the fingerboard, the sharp edges of the guards will damage it.
The guards create a downward edge on either side that can cut into my fretboard.
78% liked the comfortable grip, but 22% found it awkward to hold
The sharp edges of the item could cause damage if not taken care of before use. The sharp edge faces down towards the fretboard.
83% liked the effective fretboard cleaning, but 17% found it left residue
I advise sanding the bottom faces before using the fretboard cleaning tool.
I position the sharp edge of the guitar tool facing down towards the fretboard.
The guards have a downward edge on either side that can cut into the fretboard.
93% found it easy to wind strings, but 7% experienced difficulties
The edges of the guards are too sharp and if the fingerboard is not taped off, it will get damaged, which can be a problem while winding strings.
There is a slight lip on the edge of the tool which can damage the fingerboard. I recommend using a small file to remove it.
