Mityvac 7201 Manual Fluid Evacuator Plus with 2.3 Gallon Reservoir
Mityvac 7201 manual fluid evacator,a large 8.8 liter ( 2.3 gallon) capacity Bi pump,this manual fluid evacator,a large 2.3 Gallon reservoir,Dispenses fluid,the Dipstick Tube
What we analysed
BVR’s AI bot is continuously reading, learning and evolving to generate reviews.
13,629 reviews
covering
35 products
for the category
Garage & Shop Fluid Evacuators
Experiential insights by users
About Mityvac 7201 Manual Fluid Evacuator Plus with 2.3 Gallon Reservoir
Overall Feedback:
89% positive
69% appreciated its compact size, although 31% found it bulky
The evacuator is approximately 3.5 feet tall.
In my opinion, the device has a poor design.
79% liked its compatibility with various fluids, but 21% found it limited
The product is not compatible with GM 3800 v6 engines and the tube does not reach far enough into the oil pan to get to the oil.
83% found it easy to operate
I find the product easy to use and each change takes me about 30 minutes.
68% liked its fast flow rate, but 32% thought it was slow
The dispensing hose should be larger as it takes excessively long (5+ minutes) to fill a front or rear differential with 2-4 qts of 75-90 weight fluid.
76% praised the durable hose, while 24% experienced hose failures
The product appears durable and the hoses easily reach the bottom of the oil pan sump.
The parts, hoses and fittings are of cheap quality.
70% liked its leak-resistant design, but 30% experienced leaks
I experienced air bubbles leaking into the oil stream.
There was a small leak on the top canister which affected the evacuation of the oil back into the disposal container.
I warn against buying the product as it becomes useless once it starts leaking and the seal cannot be replaced.
84% appreciated its quiet operation, although 16% found it noisy
During the oil change, I noticed that the air rushing out and the compressor running made a lot of noise.
I could hear a fuzzing sound near one of the screws.
The product is loud.
I heard a hissing sound and wondered where it was coming from. After closing the valve, the unit worked perfectly.
Show more
65% appreciated the precise pressure control, although 35% found it hard to adjust
I faced a problem with air bubbles leaking into the oil stream. I contacted the company and received an immediate response. I fixed the issue by adding sealant between the pickup tube and the coupler in the top of the tank.
I added a vacuum/pressure gauge to view the pressures in the tank.
