Home > Door Bell Push Buttons > Broan-NuTone PB41LSN Doorbell Kit, Lighted Round Stucco Pushbutton for Home, 2.5" Diameter, Satin Nickel ; Visit the Broan-NuTone Store

Broan-NuTone PB41LSN Doorbell Kit

Add to Wishlist
Available on prime

What we analysed
BVR’s AI bot is continuously reading, learning and evolving to generate reviews. How it works?
8,429 reviews covering 35 products for the category Door Bell Push Buttons

Experiential insights by users

About Broan-NuTone PB41LSN Doorbell Kit
67% appreciated the audio quality, though 33% didn't
My door bell button was stuck in the down position, causing the electromatic system to heat up excessively.
The door bell button was stuck down for hours and the electromatic system was extremely hot.
63% praised the battery life, though 37% desired more
My doorbell has been working well for 7 years and is hooked up to a 10v transformer, which is lower voltage than normal.
My doorbell has been working well for 7 years and is hooked up to a 10v transformer, which may be the reason for its longevity.
I compared the longevity of the product to the previous one that lasted 40 years and expressed doubt.
I noticed that the button will not stay in place, the spring will not hold the cover on, and the light does not light. The button does not stay in place, the spring does not hold the cover on, and the light does not light.
63% praised the button durability, but 37% desired more
The button is made of cheap plastic and will likely crumble from the elements within a year.
I checked the button and noticed that the plastic was deteriorating, indicating poor button durability.
I am having issues with the button not staying in place, the spring not holding the cover on, and the light not lighting.
I need to replace the button as it is not durable.
Show more
66% liked the modern design, though 34% found it outdated
The new doorbell looks better than the old gold tone one.
I liked the design and concept of the product but it did not work well.
If you don't hold onto the white part just under the screws, the button (that houses bulb and wiring) will break and fall apart, snapping off the notches that hold it together. It can't be put back together, but maybe it could be super glued.
I noticed that the doorbell push button has a design flaw, it doesn't lock and click in place, causing it to separate easily. The doorbell push button separates easily due to a design flaw where it doesn't lock and click in place.
Show more
68% found it easy to install, while 32% encountered difficulties
The door-bell-push-button looks nice and installs well.
I installed this doorbell 7 years ago.
I suggested a solution to a design flaw in the product by adding a little silicone before installing the door-bell-push-buttons. This will make the installation better long term and allow for easy replacement of the bulb later.
66% liked the illumination, but 34% found it dim
The light is bright and does not stick when I push the button. It also has the option to replace the bulb if needed.
I was disappointed to find that the door bell push button had an incandescent bulb instead of an LED, despite ordering it specifically for that feature. The ad should be updated to avoid misguiding others.
I have complained that the button has a light bulb inside that requires a considerable amount of current to keep it lit. Rephrased: The button has a light bulb inside that requires a considerable amount of current to keep it lit.
I have complained that the button won't stay in place, the spring won't hold the cover on, and the light doesn't light.
Show more
63% were satisfied with the weather resistance, but 37% weren't
I tried to untighten the screws with a terminating screwdriver, but the doorbell broke into four pieces and snapped the little plastic clips. It seems that the doorbell is not weather resistant.
I noticed that the button will not stay in place, spring will not hold cover on, and light does not light. This indicates that the product is not weather resistant. The button, spring, and light do not function properly, indicating that the product is not weather resistant.
I broke the doorbell into four pieces and snapped the little plastic clips while trying to untighten the screws with a terminating screwdriver.

Buy this product now