Home > Digital-to-Analog Signal Converters > LiNKFOR USB to SPDIF Coaxial RCA and 3.5mm Headphone Jack Converter USB DAC Optical Audio Adapter USB DAC PCM for Windows Mac PS4 PS3 ; Visit the LiNKFOR Store
BVR’s AI bot is continuously reading, learning and evolving to generate reviews.
How it works?
BVR’s AI bot is a smart self learning AI bot algorithm that ingests large amount of data to filter our product reviews that are most important for you to make a purchase
23,494 reviews
covering
50+ products
for the category
Digital-to-Analog Signal Converters
Experiential insights by users
About LiNKFOR USB to SPDIF Coaxial RCA and 3.5mm Headphone Jack Converter
Overall Feedback:
88% positive
88% appreciated the wide compatibility, though 12% experienced issues
As a standalone USB to SPDIF converter, I find the product works well and sounds better than the analog feed from mobile or laptop when feeding powered speakers.
After connecting the audio DAC, I noticed a significant improvement in sound quality when using the headset through USB.
As a standalone USB to SPDIF converter, I find it works well to power speakers and sounds better than the analog feed from a mobile or laptop.
After connecting the audio dac, I noticed a significant improvement in sound quality.
I have noticed that the internal DAC converter is not galvanically decoupled from the DC supply it feeds, resulting in a constant electronic noise-floor that makes the unit useless for active power devices from AC.
I assume that the internal DAC converter is not galvanically decoupled from the DC supply it feeds, which renders the unit useless for active power devices from AC.
89% liked the connectivity, but 11% found it lacking
It works well as a standalone USB to SPDIF converter and sounds better than analog feed from mobile or laptop when feeding powered speakers.
This device works great for delivering stereo PCM over S/PDIF, and the built-in Linux audio drivers support it. Both coax and optical work simultaneously.
As a stand-alone USB to SPDIF converter, I find it works well to feed powered speakers and sounds better than an analog feed from a mobile or laptop.
The internal DAC converter is not galvanically decoupled from the DC supply it feeds, making it useless for active power devices from AC.
The sound output is pulsing, indicating that the device is not functioning as expected.
The internal DAC converter is not galvanically decoupled from the DC supply it feeds, making it useless for active power devices (from AC).
I noticed that the sound output was pulsing as if the device was turning on and off continuously.
Rephrased:
The sound output was pulsing as if the device was turning on and off continuously.
90% praised the conversion accuracy, while 10% experienced distortion
After connecting the audio DAC, I noticed a significant improvement in sound quality.
As a stand-alone USB to SPDIF converter, it works well to feed powered speakers and sounds better than the analog feed from mobile or laptop.
I briefly tried the analog outputs and found them to be fine. I won't be using the DAC quality.
After connecting the audio dac, the sound quality improved significantly.
The internal DAC converter is not galvanically decoupled from the DC supply it feeds, making it useless for active power devices from AC.
86% appreciated the durability, although 14% found it wore out
The digital-to-analog-signal-converter sounds great with no hum or hiss.
I will update my review if the product breaks, indicating my expectation of its durability.
If the product breaks, I will update my review.
I noticed that the sound quality is thin with no low end at all, possibly due to cheap ports.
96% praised the heat management, but 4% faced issues
I did not mention anything about heat management of the digital-to-analog-signal-converters.
I wanted this product but in a USB-C cable instead, showing my consideration for the heat management of the product and expressing my dissatisfaction based on my experience. It can be said that I have commented based on my experience.
I removed one star because I wanted the product to be available with a USB-C cable instead.
82% found the led indicators helpful, while 18% didn't
I think the product photo shows a power indicator, but it might just be a hole to expose bleed-through from the TOSLINK emitter, which seems to be always on, even if I choose a non-digital config.
I think the product photos show a 'power indicator', but it might just be a hole to expose bleed-through from the TOSLINK emitter, which seems to be always on, even if I choose a non-digital config.
There is a constant electronic noise-floor which is super annoying.
I noticed that the device has a recording device even though it has no inputs.
90% liked the portability, but 10% found it flimsy
The product is working great for bypassing my PC's digital to analog converter (DAC) and pre-amp.
I want to use the digital-to-analog-signal-converter to connect my active power studio monitors, which means both my source and speakers are grounded.
88% liked the user interface, but 12% found it confusing
The system offers multiple analog output options, including 1/8 TRS, SPDIF (coax), and Toslink (optical), and is plug and play with Windows 10.
This digital-to-analog-signal-converter is plug and play with Win10. I plugged it in and within one second Windows recognized the interface and changed the setting to output audio through the new device.
The device supports hardware volume control, but it only affects the analog ports and not the optical port.
I am dissatisfied with the packaging and user manual of the product. The booklet is written in broken English and some sentences are unclear. I advise not to buy the product if a fully comprehensible manual is expected.
I am dissatisfied with the packaging and manual of the product. The manual is written in broken English and is not clear to understand. I advise not to buy the product if you expect a fully comprehensible manual.
As a standalone USB to SPDIF converter, I find the product works well and sounds better than the analog feed from mobile or laptop when feeding powered speakers.
I needed to connect an older Bose Lifestyle surround sound system to a new Samsung TV with only an optical audio output, and this product did the job as described.
I can switch between my TV and FM radio sound system using the LiNKFOR Digital Toslink Optical 4x1 Switch and Sangean HDT-20 HD Radio/FM-Stereo/AM Component Tuner.
Let us know and our team will start working on your favorite product or category as soon as possible. Meanwhile let us help you search for them on Amazon.
Thanks for your feedback!
Cookies are used on this website to ensure you have the best experience possible.