iArkPower HDMI 2.0 Audio Extractor 4K60Hz HDMI to HDMI
What we analysed
BVR’s AI bot is continuously reading, learning and evolving to generate reviews.
23,494 reviews
covering
47 products
for the category
Digital-to-Analog Signal Converters
Experiential insights by users
About iArkPower HDMI 2.0 Audio Extractor 4K60Hz HDMI to HDMI
Overall Feedback:
77% positive
70% appreciated the wide compatibility, though 30% experienced issues
I could use my old sound bar with my new TV via the digital optical TOS-LINK port on this iArkPower audio extractor, which met my needs perfectly.
I received a clean line level audio signal from the RCAs and did not notice any decrease in screen resolution on the TV.
I have tried switching out the HDMI cable and the optical cable to make sure it wasn't some other component, but I have had the same result. This leads me to believe that it can only be the signal splitter.
After installing the new replacement unit, I noticed that while the video was passed through correctly, the audio had issues.
Show more
67% liked the connectivity, but 33% found it lacking
I received a clean line level audio signal from the RCAs and there was no decrease in screen resolution on the TV.
I have tried switching out the HDMI cable and the optical cable to make sure it was not some other component, but I still had the same result. This leads me to believe that it can only be the signal splitter.
I have complained that the signal splitter is very particular. If it is not set just right, it causes a really annoying flicker on the screen, almost like screen tearing. And if it is really misplaced, it makes some crazy loud static noise.
66% praised the conversion accuracy, while 34% experienced distortion
I have experienced audio stopping at 10 second intervals, as if a buffer is overloaded and needs to be reset, but then it resumes in sync with the video. This cycle repeats regardless of the video content.
Occasionally, the audio cuts out for a moment or two, usually no more than 1 second, when I use this splitter.
The signal converter is not accurate and if not set just right, it causes an annoying flicker on the screen and if really misplaced, it makes some crazy loud static noise.
Occasionally, the audio cuts out for a moment or two, usually no more than 1 second. It almost feels as if some kind of buffer is overflowing and resetting, with the audio coming back in sync right after.
Show more
69% appreciated the durability, although 31% found it wore out
I have been using this splitter for about 1.5 years now and use it nearly daily.
I was able to unpack the unit, power it up with the transformer, plug in my cables and I was good to go.
I was pleasantly surprised by the device's small size, weight, and sturdy construction.
I have expressed frustration with the unit, as it may not be durable and has been difficult to deal with.
Show more
85% praised the heat management, but 15% faced issues
I am satisfied with the device and hope it holds up over time.
I am satisfied with the device as long as it holds up over time.
Occasionally, when I use the splitter, the audio cuts out for a moment or two, usually no more than 1 second. This could be related to the heat management of the digital-to-analog-signal-converter.
When using the splitter, I notice that the audio cuts out for a moment or two, usually no more than 1 second. This could be related to heat management of the digital-to-analog-signal-converters.
Show more
72% found the led indicators helpful, while 28% didn't
I have a device with a three position slide switch that allows me to select from three output modes.
I have found that the device does not affect the picture quality of the TV signal and the lip-sync with the sound is still perfect.
I unpacked the unit, powered it up with the transformer, plugged in the cables and I was good to go.
The red annunciation did not illuminate.
71% liked the user interface, but 29% found it confusing
I was able to use my old sound bar with my new TV via the digital optical TOS-LINK port on this iArkPower audio extractor.
I can select one of three output modes using the device's three position slide switch.
This device has a three position slide switch that allows me to select one of three output modes.
My unit is very particular about its position. If it's not set just right, it causes a really annoying flicker on the screen, almost like screen tearing. And if it's really misplaced it makes some crazy loud static noise.
Show more
69% liked the portability, but 31% found it flimsy
I was pleasantly surprised to find that the device is small yet heavy and well-constructed.
It's frustrating when the signal splitter starts up with issues and I have to stop what I'm doing and move the device around to settle the signal.
