Corrosion Technologies 90101 CorrosionX 6 oz. aerosol
What we analysed
BVR’s AI bot is continuously reading, learning and evolving to generate reviews.
15,798 reviews
covering
67 products
for the category
Care Corrosion & Rust Inhibitors
Experiential insights by users
About Corrosion Technologies 90101 CorrosionX 6 oz. aerosol
Overall Feedback:
84% positive
75% liked its compatibility with various metals
I have been using CorrosionX for years and found it excellent for preventing rust and lubricating various outdoor items such as lawn equipment, axles on carts, bolts on outdoor carts and utility trailer, and lawnmower wheels.
I suggest using this lubricant to clean and protect electronics and batteries that get corroded in a boating environment.
82% liked its quick drying time
After spraying the rust inhibitor, 90% of the rust ran down and puddled on the shelf on the paper towel the next morning.
Corrosion X allows me to run my electric motor underwater and effectively prevents corrosion and rust.
I sprayed the corrosion X on the bushing and let it sit for about 12 hours.
This product is excellent for preventing rust and lubricating things.
76% found it easy to apply
I have been using CorrosionX for years and find it excellent for preventing rust and lubricating. I have also tried their Rejex auto wax with great long lasting results. I appreciate companies that consistently make effective products.
82% praised the excellent protective coating and ability to prevent rust
Based on video tests, I found that the product penetrates well and prevents corrosion better than anything available.
I use Corrosion X for many applications and it effectively prevents corrosion and rust.
The product effectively stops rust and even reverses its effects when bolts won't turn.
This lubricant can break loose rusted joints and protect against further rust.
83% appreciated its long-lasting protection, although 17% found it wore off over time
I am amazed with the product and replaced 15 other cans of junk on my shelves.
I decided to clean and paint the inside of the bumper instead of constantly spraying it with the rust inhibitor, indicating my dissatisfaction with the longevity of care-corrosion-rust-inhibitors.
73% liked its deep surface penetration, but 27% found it struggled with rough surfaces
I sprayed corrosion X on the bushing holding the auger assembly and let it sit for about 12 hours.
When the straw is down, the product sprays too much and starts dripping out the bottom of the straw, making a mess.
67% praised the excellent surface finish, while 33% noticed a sticky residue
Corrosion-X caused rust and was the worst. Nothing had much less rust than Corrosion-X.
