Corroseal Water-Based Rust Converter Metal Primer, Rust Converter
One step water based rust Converter,Corroseal water based rust Converter metal Primer,metal surfaces,Coat latex metal Primer,Rust Converter 1 Gal
What we analysed
BVR’s AI bot is continuously reading, learning and evolving to generate reviews.
15,798 reviews
covering
67 products
for the category
Care Corrosion & Rust Inhibitors
Experiential insights by users
About Corroseal Water-Based Rust Converter Metal Primer, Rust Converter
Overall Feedback:
96% positive
90% liked its compatibility with various metals
I suggest that the product should be thicker for better adherence to smaller components that are hard to reach.
85% liked its quick drying time, but 15% found it took too long
The drying time of the care-corrosion-rust-inhibitors is fast in hot weather and takes around 3-4 hours in cold weather.
The drying time of the product is important. In my experience, it requires 36-48 hrs. to properly cure under 60 degrees Fahrenheit.
After 6-7 days of applying the rust inhibitor, I noticed that the rust started bleeding through the coating, starting with small pinhole spots and getting worse over time.
92% found it easy to apply
Applying the product to my rusted lawn furniture was easy.
I found the product easy to apply and it does what it claims to do.
If something is rusty, just follow the prep instructions and apply the product. It is easy to apply.
The application process is easy with a step-by-step guide provided. It only requires a small amount to do the job.
93% praised the excellent protective coating and ability to prevent rust
I found the product effective in removing rust and controlling corrosion.
91% appreciated its long-lasting protection, although 9% found it wore off over time
This product will add 5 to 10 years of useful life to my van, making it a cost-effective purchase.
I am not sure about the longevity of the product and will have to wait to see how it performs over time.
After 11 months of storage, the product had hardened like a brick in the bottle.
90% liked its deep surface penetration, but 10% found it struggled with rough surfaces
If the rust is not uniform throughout the metal piece, it will appear blotchy after application.
92% praised the excellent surface finish, while 8% noticed a sticky residue
Rustoleum adheres very well to Corroseal. It is a harder material with better chip resistance and provides a smoother finish without brush strokes.
I suggest that before applying conventional paints and rust inhibitors, one must either remove all rust or convert all rust to prevent recent rust from returning.
My experience with the topcoating is that it eventually flakes off, indicating that it is not effective in preventing rust or corrosion.
