Boat Fenders Ribbed Twin Eyes Pack of 4 and Pump to Inflate
What we analysed
BVR’s AI bot is continuously reading, learning and evolving to generate reviews.
4,042 reviews
covering
30 products
for the category
Boat Fenders
Experiential insights by users
About Boat Fenders Ribbed Twin Eyes Pack of 4 and Pump to Inflate
Overall Feedback:
70% positive
69% liked the sleek and modern design, but 31% found it didn't match their boat's style
The fender quickly deflated through a pin hole in seam, indicating that its aesthetics are not up to the mark.
68% appreciated its compatibility with various boat sizes, though 32% found it didn't fit their specific boat model
After purchasing the inflatable bumpers, I was pleasantly surprised with their performance despite my initial uncertainty.
I initially believed that the air was coming from the pump, but upon inflating the fender, it rapidly deflated due to a pin hole in the seam.
67% praised for its durability, but 33% experienced cracks after a few uses
I noticed that one of the four fenders leaked at the valve, as seen in the photo.
One of the four fenders leaked at the valve, as seen in the photo.
I am concerned about the durability of the fender, particularly the seams. They may not withstand the pressure of a boat hitting against a dock or other boats.
69% found it easy to install, while 31% struggled with the process
I found that the fender quickly deflated through a pin hole in seam, indicating that the installation process was not easy or reliable.
The boat-fenders have excess material on both ends about 1 inch inside the center tube, which may make threading line through them a bit difficult, and may cause damage to the lines.
70% liked how easy it was to maintain, but 30% found it required frequent cleaning
All four fenders have excess material on both ends about 1 inch inside the center tube, which may make threading line through them difficult and may cause damage to the lines.
If the seams are not trustworthy, the fender will not withstand the pressure of a boat banging against a dock or other tied up boats.
68% praised for its mooring protection, while 32% experienced scratches and scrapes
I am concerned that the seams of the fender may not withstand the pressure of a boat bumping against a dock or other tied up boats.
68% appreciated its rigidity and stability, though 32% found it flexed under pressure
The fenders have excess material on both ends about 1 inch inside the center tube, which may make threading line through them difficult and cause damage to the lines.
64% appreciated its excellent shock absorption, though 36% found it lacking in high-impact situations
I am concerned that the fender may not withstand the pressure of a boat banging against a dock or other tied up boats if the seams are not trustworthy.
74% praised for its high weight capacity, while 26% experienced issues with their heavier boat
The bumpers have a good weight capacity as they are composed of a thick durable wall.
I am concerned that the seams of the fender may not be reliable enough to withstand the pressure of a boat bumping against a dock or other tied up boats.
