MOTOPOWER MP00205A 12V 800mA Automatic Battery Charger
Battery Capacity : 12V
|
Amperage : 800mA|
Compatibility with battery type : Yes|
Safety features : Overcharge protection, Short circuit protection|
Input Voltage : 100-240V|
Display and indicators : Yes|
Charger Type : Wall charger|
Warranty : 1 year|
Battery Type : Lead-acid|
Product Dimensions : 3.5 x 2 x 1 inches|
Protection Features : Overcharge Protection|
Output voltage : 12V
What we analysed
BVR’s AI bot is continuously reading, learning and evolving to generate reviews.
17,347 reviews
covering
50+ products
for the category
Battery Chargers
Experiential insights by users
About MOTOPOWER MP00205A 12V 800mA Automatic Battery Charger
Overall Feedback:
89% positive
66% were satisfied with the input voltage range, but 34% disagreed
The user mentioned that the green LED came on when he plugged the charger to a 12V 17AH battery which was low on charge.
The user mentioned that the battery charger output voltage rises to 14.6VDC when the battery isn't fully charged and drops to 13.6VDC when the charge is completed. These values are usually recommended for acid-lead batteries.
The user has mentioned that the charger does not test low voltage, so the only way to charge a dead battery with the new larger chargers is to cycle engine start a few times. This indicates that the user has used the charger and has faced this problem personally. Thus, it can be said that user has commeted that based on his experience. So, it is experience-rich snippet.
70% praised the built-in safety features, but 30% experienced issues
The reviewer mentions that the charger has a small LED light that blinks green when charging and solid green when charged. The light turns red if a problem is detected. This indicates that the reviewer has used the charger and has observed these safety features personally.
The user chose this charger because of its small charging current of 0.8A, which he believed would be safe for a car battery.
The charger has safety features like automatic charging, maintenance, trickle, and desulfation which help to keep my batteries in top-notch condition.
The charger failed and took the battery it was supposed to protect.
85% liked the portable design, but 15% found it bulky
The user likes that the charger comes with a two-prong adapter and clamp-on as well as ring connectors.
The user mentioned that the charger is easy to install and use.
The user mentioned that the charger is small and has enough cord to hang on the wall next to the car.
The second charger failed and took the battery it was supposed to protect.
85% found it compatible with various devices, but 15% didn't
The user checked the voltage output of the battery charger with a multimeter and mentioned the recommended values for acid-lead batteries.
This charger effortlessly keeps my batteries in top-notch condition with its automatic charging, maintenance, trickle, and desulfation features.
I faced issues with the positive lead of the charger, which broke straight away and I had to reattach and solder it in place. The negative lead may need the same attention at some point.
83% were impressed with the fast charging speed, while 17% weren't
The user mentioned that he received the charger pretty fast and after a few hours of charge, his batteries were back.
The user mentioned that the battery charger output voltage rises to 14.6VDC when the battery isn't fully charged and drops to 13,6VDC when the charge is completed. These values are usually recommended for acid-lead batteries.
The user has mentioned that the battery charger takes a few attempts to start charging and it is not effective against a really dead battery. The charging speed seems to be slow as it is only about 10W.
I was disappointed with the product as I had to replace a dead battery that it was supposed to maintain.
87% found it easy to use, but 13% found it difficult
This charger has clear indicators and an intuitive design, making it incredibly user-friendly.
I faced issues with the positive lead of the charger and had to reattach and solder it in place. I may need to do the same with the negative lead at some point.
