Elitech STC-1000WiFi Pro Temperature Controller WiFi 2-Stage Outlet Thermostat
What we analysed
BVR’s AI bot is continuously reading, learning and evolving to generate reviews.
19,686 reviews
covering
12 products
for the category
Aquarium Heaters & Chillers
Experiential insights by users
About Elitech STC-1000WiFi Pro Temperature Controller WiFi 2-Stage Outlet Thermostat
Overall Feedback:
72% positive
76% liked the built-in monitoring system accurate, but 24% found it unreliable.
The temperature accuracy of the aquarium-heaters-chillers depends on the sensor location within the environment. Compared to a second source, accuracy is +/- 2-3F and stability is +/-1-2F.
I have complained that the temperature probe has no filtering, causing the temperature to swing by 3-5 degrees every half a second, resulting in inaccurate readings.
85% appreciated its adjustable settings
I used the device in a greenhouse to activate heat when the temperature dropped below 50 and to activate a fan to pull cooling air when the temperature reached 80 degrees.
74% found it to be extremely durable, but 26% experienced a short lifespan.
I have owned this product for 10 months and there have been no updates to the software, indicating that it may not be durable.
The device worked well for a year and a half before it failed this spring.
I noticed that the device stopped searching for the device and never found it again, indicating that it may not be durable.
The device stopped searching and never found it again, indicating it may not be durable.
91% found it easy to install, while 9% struggled with the process.
I ordered an Inkbird and using Tuya Smart app, I found the plug in a second and within another few seconds it was connected, which shows that the installation process was easy for me.
I haven't seen any updates to the software for the last 10 months, which is a negative aspect of the product.
77% liked its quiet operation, but 23% found it too loud.
I have noticed that setting a tight range results in a lot of relays clicking on and off, indicating a high noise level of the product.
I couldn't find any information about the noise level in the review.
74% praised for its built-in safety features, while 26% experienced a malfunction.
The heating relay gets stuck in the on position and setting the heater on max causes the temperature controller to fail, resulting in boiled aquarium inhabitants.
84% praised for its precise temperature control, while 16% experienced fluctuations.
The temperature accuracy depends on the sensor location within the environment. Compared to a 2nd source, accuracy is +/- 2-3F and stability is +/-1-2F.
I have complained that the temperature probe has no filtering, causing temperature swings of 3-5 degrees every half a second. This results in the relay clicking on and off quickly with each temp swing.
