QWORK Air Compressor Pressure Switch Control Valve
What we analysed
BVR’s AI bot is continuously reading, learning and evolving to generate reviews.
10,838 reviews
covering
48 products
for the category
Air-Compressor Accessories
Experiential insights by users
About QWORK Air Compressor Pressure Switch Control Valve
Overall Feedback:
72% positive
70% praised the durable construction, while 30% experienced breakage.
I have noticed that the air compressor accessory threads are of poor quality and require two or three times more teflon tape than usual to prevent air leaks.
I cannot troubleshoot the defective product without instructions.
I barely tightened the little red wing valve and noticed that the brass jacket disintegrated, causing me to complain about the secondary valve.
Rephrased:
When I barely tightened the little red wing valve, the brass jacket disintegrated, causing me to complain about the secondary valve.
71% found the installation process to be easy, but 29% experienced difficulty.
While installing the item, a small part broke in half, indicating difficulty in installation.
68% praised the durable hose material, while 32% experienced leakage issues.
The threads of the air-compressor-accessories are of poor quality and I need to use two or three times more teflon tape than I usually would to eliminate the air leaks from the various connection points. Just using a few wraps of teflon tape won't work as the poor quality threads will still leak.
64% liked the noise-reducing design, but 36% found it ineffective.
The relief valve turns on, bringing pressure down to around 60psi, starting the motor and repeating the cycle.
By using a few more wraps of Teflon tape than usual, I can eliminate air leaks from the connection points.
I heard a hissing noise and then a crack before the product blew up almost in my face.
71% appreciated the effective air filter, though 29% noticed a decrease in airflow.
My unit's pressure switch leaks at the switch above 90 PSI, affecting the performance of my air-compressor accessories.
What was supposed to be a quick fix turned into a day-long problem.
63% found the pressure gauge to be highly accurate, while 37% experienced inconsistent readings.
The pressure switch and regulator work as expected, shutting off at 120 psi and regulating to a lower pressure as it should.
I have noticed that my pressure switch leaks above 90 PSI, even though I have set it to cut out at 120 PSI. However, if I set it to cut out at 90 PSI or below, there are no leaks.
I have noticed that the pressure, regulator and pressure gauge both rub the power housing before becoming tight enough to seal, indicating that the pressure accuracy of the air-compressor-accessories is not up to the mark.
70% appreciated the convenient storage design
I appreciate how the picture shows the air compressor accessories assembled without any pipe dope or pipe tape.
