Lippert Components - 2020106863 Tire LINC Tire Pressure and Temperature Monitoring System for RVs
What we analysed
BVR’s AI bot is continuously reading, learning and evolving to generate reviews.
8,255 reviews
covering
50+ products
for the category
Aftermarket Tire Pressure Monitoring Systems (TPMS)
Experiential insights by users
About Lippert Components - 2020106863 Tire LINC Tire Pressure and Temperature Monitoring System for RVs
Overall Feedback:
75% positive
71% praised for its accuracy, while 29% experienced inconsistent results.
When I checked the air pressure with a high quality gauge, it was extremely accurate.
The pressure monitor loses at least a pound of air when I remove and put back the valve. I also have to reset the valves frequently as they are not consistent.
The app provides passive notifications when an abnormal condition is sensed, and I am usually not aware of it until I use my phone again.
I often can't access the readings as the app scrolls endlessly.
67% liked the timely alarms and notifications, but 33% found them too frequent.
The alert unit beeps annoyingly twice every minute or so when it loses contact with sensors. When it goes offline, it beeps even louder 6 times.
After syncing all 6 sensors, I was unable to set the high and low pressure alarms.
This system is not suitable for those who need an alert feature as it does not have one.
I am concerned that the sensor fails to connect with the iPhone app while the vehicle is in motion 75% of the time.
63% liked the long battery life, but 37% experienced shorter battery life than expected.
I have to reset the valves frequently, resulting in losing at least a pound of air. This indicates that the battery life of the aftermarket tire pressure monitoring system is not good.
72% praised for its universal compatibility, but 28% experienced issues with their specific vehicle.
Pairing the app was very glitchy and it took several attempts to get it to communicate.
I find the product worthless since I often camp in areas without cell services.
69% liked the reliable wireless connectivity, but 31% experienced connectivity issues.
The TPMS worked great, except for occasional connection issues with some tires.
After some time of non-use, I noticed that the module loses interest in connecting with the phone.
The module loses interest in connecting with the phone after some time of non-use.
I faced several issues while using the tire pressure monitoring system. Even after replacing the transponder, it still goes off line despite the voltage being above the required level. At times, it loses contact with sensors and I have to remove and tap it on the ground to get it to work, but it loses it again while driving.
I have to hit the button in the app multiple times to get it to reconnect, which is annoying and unsafe while driving.
Show more
82% found it easy to install, but 18% had difficulties with setup.
I found the installation easy and everything worked fine during the first trip with the unit.
Installing the sensors is easy, but the repeater requires mounting and a 12v power source.
I purchased it in July 2021 for my travel trailer and found the installation relatively easy.
70% appreciated the quality material, but 30% experienced premature failure.
One of my sensors consistently reads 5-10 degrees lower than the other 3 even when tires are cold.
I warn that this system is not suitable for users who need alerts when something is sensed.
After only 1 year and 2 months of installation, the repeater is dead.
82% praised for its wide accuracy range, but 18% experienced issues outside of the specified range.
One of our sensors consistently reads 5-10 degrees lower than the other 3 sensors even when tires are cold.
At times, the TPMS loses contact with sensors. I have to remove the sensor, tap it on the ground to get it to work, then it loses it again while driving.
73% appreciated the clear and intuitive display, but 27% found it confusing.
The set-up process was easy and it works via Bluetooth even without cell data.
I find the display of the product too small to see the pressure or temperature readings.
I suggest improving the app by removing unnecessary static parts of the screen and making the relevant information larger and easier to read at a glance.
The app doesn't look like the pictures in the manual.
