TechDiamonTools A Set of 3 Wool Cloths for Buffing or Polishing
What we analysed
BVR’s AI bot is continuously reading, learning and evolving to generate reviews.
4,988 reviews
covering
50+ products
for the category
Abrasive Finishing Compounds
Experiential insights by users
About TechDiamonTools A Set of 3 Wool Cloths for Buffing or Polishing
Overall Feedback:
91% positive
82% liked its abrasion-resistant properties
I polished the glass using pastes and dremel felt wheels, starting with the 1200 and ending with the 4000. The glass cleared up amazingly.
After using the series of compounds, I couldn't even tell where the scratches were, indicating that the abrasive-finishing-compounds have good abrasion resistance.
85% praised for its compatibility with a range of materials
I use the product to polish the UV resin finish on the custom wood/epoxy keychains I make.
I started with the 14k grit and then 5k with my Dremel at low speed using a new wool pad, and noticed a difference within 15 minutes.
After using the series of compounds, I was unable to find the scratches on the G-Shock.
87% liked the ease of application, while 13% found it difficult to mix.
I found it easy to use abrasive-finishing-compounds to clean up the scratched resin "crystal" of my work watch. I started with the 1,050 grit and worked my way to the 3,000 grit. The process took me a total of 15 minutes between getting everything out, buffing and rinsing.
I found the abrasive-finishing-compounds easy to use with fantastic results. I took a blade with rough spots while cutting paper and used the 4000 grit, wiping any residue to prevent contamination. The blade came back beautifully sharp and now cuts paper with ease.
The only negative aspect was that the 800 grit was dried out and required some effort to get it out of the syringe and add oil to make it work.
87% praised for its exceptional grinding performance
I have used this buffing compound twice and it has worked exceptionally well, just as expected.
The product works great with no tight spots, has a mirror finish, and improved accuracy from marginal to fantastic.
75% appreciated the minimal residue level
I used this buffing compound to clean up the scratched resin crystal of my work watch. The watch crystal was scratched and it was difficult to see the small digital display at the bottom of the analog watch face.
87% liked the high-quality surface finish
I am pleased with the surface finish of the abrasive-finishing-compounds. It makes the keychains shine and gives them a nice slick surface that helps prevent dirt from sticking to the surface.
I noticed that there were no tight spots and it had a mirror finish. The accuracy also improved from marginal to fantastic.
There were no tight spots and it had a mirror finish. The accuracy improved from marginal to fantastic.
