Toilet Buying Guide
Along with bath and showers, the Toilet is one of the core necessities of every household. The most common toilet type is in the form of two parts: a tank and a bowl, where the bowl is connected to the drain to flush out wastes. A proper toilet is identified by its flushing capacity, reliability, water-saving capacity, and maintenance duration. There are majorly two types of toilets, available in many colors and styles, single flush and double flush toilets. A Single Flush Toilet is the most commonly used Toilet where it flushes both solid and liquid waste with the same quantity of water. The Dual Flush Toilet, on the other hand, has two flush settings. One setting ejects more water to flush the solid waste and the other discharges less water to flush out liquid waste. A Dual Flush Toilet is water-efficient, but is high-maintenance, as compared to a Single Flush Toilet. If you are planning to buy a new toilet for your house, keep reading this blog for more information on how to go about it.
Single Flush Vs. Dual Flush toilets
Single Flush Toilet consumes around 12 liters of water per flush as it uses the same quantity of water for flushing off both solid and liquid waste. Whereas, a Dual Flush Toilet has two flush mechanisms. Full mode for flushing solid waste and half mode for flushing liquid waste. It uses around 6-8 liters of water for full flush mode and 3-4 liters for half flush mode.
A Dual Flush Toilet is very conducive and compelling, but it is tough to maintain due to the scarcity of replaceable parts and expensive installation. But, a Single Flush Toilet has readily available parts and has a lower installation cost.
A Single Flush Toilet costs less as compared to the Dual Flush Toilets. The advantage of using a Dual Flush Toilets is that it consumes less water and ejects water at high pressure, making it much more efficient than a Single Flush Toilet.
A Dual Flush Toilet saves a lot of water due to its advanced mechanism of two-mode settings as compared to a Single Flush Toilet that uses a large amount of water on every single flush. Therefore, from a water-conservation point of view, the Dual Flush Toilets are considered environmentally friendly.
Factors to Consider before Buying a Toilet
It is essential to measure the distance between the walls and rear bolts of the toilet Secondly, check the rough-in. It is the distance between the toilet and the waste outlet. Different toilet has different rough-in sizes varying from 10 inches to 14 inches. So, measure carefully before buying a toilet for your home.
The Shape of the Bowl
Toilet seats come only in two shapes- round and elongated. The standard toilet bowls used mostly come in round shape. Elongated Toilet bowls are oval and provide more comfort. For a small bathroom size, you can buy a round-shaped toilet seat and for larger spaces, you can go for an elongated toilet seat.
Many traditional toilets have a single-lever flushing system that uses the same quantity of water to flush both solid and liquid waste every single time, resulting in higher water consumption. But, if you are looking for a water-efficient and environment- friendly toilet, go for the dual mechanism flushing system.
Height of the Bowl
The distance between the floor to the toilet bowl is the total height of the bowl. Most of the toilet bowls come in a standard size, i.e., 14 inches to 16 inches. There are also taller toilets available in the market, specially designed for physically challenged and older people. Measure the height accurately before purchasing.
Buying a toilet may look like a simple decision, but it takes a lot of effort to choose the best one that suits your needs. It is essential to look into its types and other factors before buying one. Take a look at the featured section above for more recommended options.