Buying Guide for Subwoofer Cable
Subwoofer cables are thin, flexible wires that connect the subwoofer output of your home theatre system to the main speaker output. When setting up your home theater speakers, it’s important to realize that the sound comes from the rear of the speakers, not the front. This can help audiophiles determine how well the speakers are tuned. So, if you want to pinpoint the tweeters, you’ll need to pay attention to where the sound emanates from. Subwoofer cables may sound complicated at times, but it’s actually not as hard as it sounds.
Subwoofer cables are a section of wire that connects your subwoofer to the rest of your speakers. The two main types of subwoofer cables are single and double. Single subwoofer cables include one type (usually 1 to 4 conductors). Double subwoofer cables include two types, usually 2 conductors, or 4 conductors. These provide different amounts of bass. Continue reading our blog, we have listed various benefits and factors about the product based on its performance. You can also check out Amazon to know more about the varieties of the product.
Benefits of Subwoofer Cable
Pure Material
Subwoofer Cables are rigorously engineered with proven design principles and high-quality materials, you can achieve the same level of performance at a fraction of the cost of the mega-expensive cables.
Great Potential
Low-quality speaker and line-level component connections can be susceptible to different forms of interference and other signal degradation, which has been proven to add noise and affect audio signal quality. Replacing it with properly shielded, high-quality cables lets your system perform to its full potential.
Ability and Performance
There is no proof that intricately braided wires within a cable improve performance, but many cable manufacturers use twisted conductors to reduce crosstalk and interference noise. Performance is greatly impacted by the cable’s purity, as well as its ability to reject interference.
Availability
Both regular and mono subwoofer cables are available, as well as split cables. Subwoofers with stereo inputs are typically wired with split cables, as this ensures that both inputs receive the same signal in the amplifier circuit. As a result, the volume is also raised by approximately 50%. The subwoofer can operate at only 3 dB, even though both inputs are not necessary due to its construction. If one of the inputs of the subwoofer is named mono or LFE, you can simply use a mono subwoofer cable.
Facts to Consider Before Buying Subwoofer Cable
Compatibility
You need to find a subwoofer cable that is compatible with your type of subwoofer. Subwoofer cables are categorized by impedance, and the higher an impedance, the thicker the cable needs to be. Thicker cables can handle more current and can handle subwoofers with higher sensitivity ratings.
Gauze of the Cable
A thicker gauge cable will handle more current and sustain the signal better, but it also has a higher risk of EMI interference. A thinner gauge cable will be cheaper but will have a smaller signal.
Cable Noise
Cable noise should not be higher. In terms of cable, you want a very well-screened cable with reasonably high capacitance for a sub-signal. Capacitance in a cable is generally a bad thing as it reduces high frequencies, but as you don’t need or want these running to a sub, it can help to reduce interference and noise pickup.
Flexibility
Powerful insulation while maintaining the necessary flexibility will also be a big plus. Especially if you plan to run a cable in a concealed manner or just behind furniture. Thus, subwoofer cables do matter as they enhance sound quality through increased shielding added to the cable they serve to improve the analog signal sent through the wires and reduce audio hum that would otherwise be produced.
Conclusion
Wires are hardware used to connect electrical components to the power source. A wire can also be flexible, which means it is not too hard and it can be bent, but there is a limit to how much it can bend. Copper, rubber, silicone, some of the new material is made of plastic, or even a combination of those materials are used to manufacture the wire.
Wire installation is simple. Read our blog to know more about the product. To know your buying choices, head over to our featured section. We review and recommend leading products based on design, performance, and ease of use.
