Buying Guide for Bike Brake Cables and Housing
The bike brake cables housing is a type of material or device used to protect the brake cables on your bicycle. This can help in preventing the cables from getting damaged. You will also notice that the housing is usually made of plastic or rubber, which is designed to make it durable. In fact, it is the housing that your motorcycle uses to fix the brake cables. Holds the cables in place so they don't rub or appear to be in danger of breaking.
Benefits of Bike Brake Cables and Housing
Easy to Install
Braking cables should be 1800mm long, and rear shifter cables should be 2100mm long. The cables can be lengthened or shortened according to your bike. Make sure the cable end is covered with the crimp after installation.
Easy to Replace
If you have a front and back brake cable, make sure you use the shorter cable first so your front brake will work, then use the longer cable for your back brake. When you want to cut off the brake cable. I suggest you use a Dremel tool with abrasive. When using the cables, please wear the caps to prevent scratching.
Corrosion Resistance
A brake cable consists of 19 wires and is zinc-coated to the highest standard which makes it Durable, smooth, and corrosion-resistant, it can provide smooth movement.
Widely Usages
It is good for professional use. It will fit in most bikes, for example MTB, road bike, BMX bike, folding bike, recreational cycling.
Factor to Consider before Buying Bike Brake Cables and Housing
Product Design
Make sure the cable end crimps are lightweight, portable, and easy to install. This will help you increase productivity. The O-rings make the installation easier, so make sure that it has them. It simply needs to be slid onto the bicycle brake/gear cable if it has a right.
Available in Kits
It is also possible to check if the item is in the kit. The price will be cheaper if the item is available. Companies like Hyacinth have kits that include everything you need, from sheath ferrules and end caps to two different cables of different lengths. The cable is, however, not long enough to work for tandem bikes, but it is long enough to fit your bike.
Reliable Manufacturers and Sellers
Many wire brands are available on the market, some of them meeting the required standards. Therefore, it is important to know a manufacturer or a seller who only manufactures wires in accordance with standard specifications and a seller who only sells quality materials from organized companies.
Lasts Long
Make sure it last for at least 2 to 3 years. The same goes for brake cables and shifter cables. It is recommended that both brake and shifter cable housings be replaced at the same time to make future replacements simpler.
Conclusion
The brake cables housing is an important part of your bike. It is the part of the bike that transfers the pressure from the handlebars to the brake pads that make your bike stop. If you want an efficient bike that is easy to control, you need to make sure that you have a brake cables housing that is up to the job.
You can find more information on the products we recommend in our featured section above. The products listed there have been reviewed and rated based on their quality, install, and durability.
